TOOLS FOR ONE-COMPONENT CERAMIC SYSTEMS
Syringe and cartridge-style systems can be used with Aremco’s ceramic and ceramic-metallic high-temperature systems.
Two standard 30cc syringes are offered, one for manual use, the other for use with a mechanical dispense gun.
A standard 6 oz. (173cc) high density polyethylene cartridge with 1/4 NPT female threads is also offered. Manual and pneumatic hand guns, and plastic and stainless steel needles are also provided.
All metal and plastic components are easily reused since Aremco’s ceramic and ceramic-metallic products are water-based.
Standard 50ml cartridges and accessories for 1:1 mix ratio systems are available.
SYRINGE OPTIONS
8100
Squeeze Bottle, 9 oz.
8200
30cc Mechanical Syringe Gun
8201
30cc Barrel, Plunger and Tip Cap Kit
CARTRIDGE OPTIONS
8525
Plastic Nozzles, 1/4 NPT, 1/16” Orifice, 4.0” Long
8530
Plastic Nozzles, 1/4 NPT, 1/8” Orifice, 4.0” Long
8535
Stainless Steel Needles, 1/4 NPT x 2.5”, 8 Gauge
8540
Stainless Steel Needles, 1/4 NPT x 2.5”, 10 Gauge
8545
Stainless Steel Needles, 1/4 NPT x 2.5”, 12 Gauge
8550
Stainless Steel Needles, 1/4 NPT x 2.5”, 14 Gauge
TOOLS FOR TWO-COMPONENT EPOXY SYSTEMS
A standard 50ml dual barrel cartridge is offered for Aremco’s High Performance 1:1 Epoxy Systems. Most 1:1 products described in Technical Bulletins A7 and A8 are offered in pre-packaged 50ml cartridges. Part numbers for dispense guns, nozzles and needles are provided below.
9700
Mechanical Dispense Gun
9900
Un-Filled Dual Barrel Cartridge (25ml/barrel)
Including (2) Pistons and Tip Cap
9905
Static Mixing Nozzle, 3.5”
9910
Static Mixing Nozzle, 6.0”
9920
Mixer-Needle Adapter
9921
Needle, .063” ID x 1/2” L
9922
Needle, .047” ID x 1/2” L
9923
Needle, .033” ID x 1/2” L
9924
Needle, .023” ID x 1/2” L
9925
Needle, .016” ID x 1/2” L
9926
Needle, .010” ID x 1/2” L
MIXER
7000
Pneumatic Mixer for pints, quarts and gallons.
+1 (845) 268 0039
